Ametek PLA-PLW Programming Manual Manual do Utilizador descarregar pdf (Página 32)

PORT COMMANDS

These commands control the general purpose digital port on the electronic load modules.

PORT

This command sets the state of the general purpose digital port on the specified electronic load

module. A value of 1 sets the state high, a 0 sets the state low.

Command Syntax PORT <bool>

Parameters 0 | 1 | OFF | ON

*RST Value OFF

Query Syntax PORT?

Returned Parameters <bool>, 0 | 1

INPUT CONTACTOR COMMANDS

These commands control the INPUT CONTACTOR function providing Mode Selection and

Delay Time Setting.

[SOURce:]INPut:CONtactor

This command configures the INPUT CONTACTOR Mode

Command Syntax INPut:CONtactor <mode>

Parameters 1: DISABLE | 2: PORT0+ @ ON | 3: PORT0+ @ ON

Query Syntax INPut:CONtactor?

Returned Parameters 1 | 2 | 3

[SOURce:]INPut:CONtactor:DELay

This command configures the INPUT CONTACTOR Mode

Command Syntax INPut:CONtactor:DELay <delay-time>

Parameters 50 ~ 500ms

Query Syntax INPut:CONtactor:DELay?

Returned Parameters 50 ~ 500ms

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 73 74

Sem comentários

Ametek PLA-PLW Programming Manual Manual do Utilizador Página 32