Ametek SFA Series Programming Manual Manual do Utilizador descarregar pdf (Página 25)

Sorensen SF Series IEEE 488.2 and SCPI Command Operation

3.6.2 MEASURE SCPI Command Reference

In the following table a "C" in the SCPI column indicates that the command is SCPI-compliant.

Command Description SCPI

MEASure

Measure subsystem. C

:CURRent?

Returns the floating point value of the DC output

current in amps.

:CURRent

:AVErage

<value>

Enter a value of 1 to 5 to set the number of readings

to average together when returning the current value

from the MEAS:CURR? command. This function

reduces noise in the readback readings. The

(default) value of 1 provides the fastest response

time, but the noisiest readings.

:AVErage?

Returns the number 1 to 5 to indicate the last set

number of readings to average together when taking

a current reading.

:VOLTage?

Returns the floating point value of the DC output

voltage in volts.

:VOLTage

:AVErage

<value>

Enter a value of 1 to 5 to set the number of readings

to average together when returning the voltage value

from the MEAS:VOLT? command. This function

reduces noise in the readback readings. The

(default) value of 1 provides the fastest response

time, but the noisiest readings.

:AVErage?

Returns the number 1 to 5 to indicate the last set

number of readings to average together when taking

a voltage reading.

M550292-03 (Programming) 3-13

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Sem comentários

Ametek SFA Series Programming Manual Manual do Utilizador Página 25