Ametek 2110 Shut Height Monitor Manual do Utilizador descarregar pdf (Página 35)

Installation and Programming Manual

Chapter 4: Programming

Installation and Programming Manual

Chapter 4: Programming

Count Direction (301)

The Count Direction function is used to change the direction the shut height position will move

as the LDT’s magnet travels along the guide rail. A 0 value will cause the position to increment

as the magnet moves away from the LDT head. A value of 1 will cause the position to increment

as the magnet moves toward the LDT head. The default for this function is 1. For further

explanations, see Figure 4-2. To change the value of the Count Direction function, perform the

following steps:

1. Select the function key.

The monitor displays “F-----”.

2. Select function number 301 . Select the enter key.

The monitor displays the function’s current value.

3. Enter either a 0 or 1. Select the enter key.

301

Enter either

0 or 1

Figure 4-2 Count Direction Function

Count Direction Function = 0 Count Direction Function = 1

100

When the Count Direction Function is

programmed with a value of 0, the

monitor will increment when the LDT’s

magnet assembly is moving away from

the head of the LDT.

When the Count Direction Function is

programmed with a value of 1, the

monitor will increment when the LDT’s

magnet assembly is moving toward the

head of the LDT.

(F)

T13692 Chapter 4.indd 3/17/04, 6:50 AM31

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 58 59

Sem comentários

Ametek 2110 Shut Height Monitor Manual do Utilizador Página 35