Ametek ReFlex Programming Manual Manual do Utilizador descarregar pdf (Página 64)

ReFlex Power™ Programming Manual DC Module Remote Programming

60 M380056-03 Rev M

3.8

OUTPUT SCPI COMMANDS

3.8.1 OUTPUT

SCPI

OMMAND

UMMARY

OUTPut[n]

:ISOLation <bool>

:DEFault <bool>

:DEFault?

:ISOLation?

:POLarity <NORM/0/OFF|INV/1/ON>

:POLarity?

:PROTection

:DELAY <NRf>

:DELAY?

:FOLD <NRi>

:FOLD?

:SENSe <bool>

:DEFault <bool>

:DEFault?

:SENse?

:STATe <bool>

:STATe?

:TRIPped?

:MODFault <bool>

:MODFault?

:CLEar <bool>

:CLEar?

:DPDelay

:TIMER <NRf>

:TIMER?

3.8.2 OUTPUT

SCPI

OMMAND

EFERENCE

Command

Description

OUTPut<n>

Output subsystem. Module ‘n’.

:ISOLation <bool>

Turns 1/ON or 0/OFF, the output isolation relay. The output

voltage must be set to zero prior to issuing this command. The

ISOL relay can’t be opened if Sense relay is closed.

:ISOLation?

Query the state of the ISOLation relay. 0 = open, 1 = closed.

DEFault <bool>

Sets DEFault state of ISOL Relay, POR default state is ON. The

ISOL/SENSe relays will be automatically sequenced during the

STATE command.

DEFault?

Query DEFault state of Isolation relay

:POLarity

Changes the state of the polarity relay. This command requires

that the isolation/sense relays be opened beforehand. If the

isolation relay is closed when this command is attempted, the

state of the polarity relay will not change, and an error message

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 133 134

Comentários a estes Manuais

Sem comentários

Ametek ReFlex Programming Manual Manual do Utilizador Página 64

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Ametek ReFlex Programming Manual